The figure-eight power sockets used by the full-performance comprehensive tester of the Two Pole Switch and the product under test should be intact and fixed sockets. Two Pole Switch belongs to the international IEC60320-C14 standard coupler socket, and it is forbidden to use sockets that do not meet the specifications. If the 8-character socket is damaged, it should be replaced in time. The power sockets used by the comprehensive safety performance tester and the product under test should be intact fixed sockets. The use of Two Pole Switches that do not meet the specifications is prohibited. Damaged sockets should be replaced in time. During the test, it is strictly forbidden for the operator's body, the live parts of the instrument and the load shell to be tested, and beware of electric shock.

Start the tester: Press the power switch on the panel, and the tester starts up immediately. After a delay of seconds, the self-test interface will be displayed.

Self-inspection: After confirming that the device to be inspected is not connected to the junction box, press the confirm button, and the instrument self-inspects. The self-test is correct, and the main menu is automatically entered. After selecting the test, set up several test groups according to the products of different specifications and models, in the main menu, press the OK key, first set the password, and then press the up or down key at the beginning of each row to select insulation, grounding, For test items such as withstand voltage, leakage, and startup, set the test conditions, alarm values, and test time of each item according to the test requirements, and use the left and right movement keys to set the increased or decreased parameter values.

Two Pole Switch https://www.tangrammould.com/Two-Pole-Switch.html