I noticed that my TV and the mobile are not performing well when I try to access the online content. I checked my TV and mobile for any issues. But when I check my router, I observe that my broadband light blinking red. I don't know why this is happening. Can anyone tell me how to correct it?
Emma Watts
If you are one of those users who face the same as Emma is facing. Then, this issue needs to be fixed soon. Basically, when your broadband light blinking red, it indicates that your broadband router suffers from an internet issue. When this happens, you will find that none of your internet-based devices, such as computers, mobiles, TV, and laptops, can't connect to the internet. With this informational guide, we will help you to resolve your issue. But before jumping to the solutions, let's look at the reasons why this issue occurs.
Why Broadband Light Blinking Red?
Whenever your broadband turns green to red, there can be some severe condition behind this. These are:
- The broadband servers are down or under maintenance.
- Due to the power issue with the device.
- Some faulty connections make it difficult for the router to connect to the servers.
- Utilizing an outdated version of the router's software.
- When the broadband's hardware is broken.
- Bad weather is also a reason for poor internet connection.
Now, you know why is your broadband light blinking red. But, the broadband has different kinds of light that indicate the problem according to the colors. You must look at them if you are experiencing one of them.
What Does Broadband Lights Indicate?
The broadband has red, green, and yellow color lights, which indicates different the following terms:
- Flashing Red Light: The broadband detected the signal but didn't set up any connection.
- Solid Red: No signal on a line when it blinks
- Flashing Green: The broadband router is in the powering mode or attempting to get a broadband connection.
- Solid Green: The router has a good and strong broadband signal.
- Flashing Yellow: The LTE device is in position but not operating correctly.
Now, after knowing what different lights indicates in the broadband router, it's time to resolve the issue. But before heading towards the solution, you must perform some process.
What to do Before Settle Broadband Light Blinking Red Issue?
There are a few things you must perform to solve the problem. It is possible to fix the issue and result in something minor. These are:
Upgrade Router Firmware
An outdated router's firmware leads you to this problem. Simply enter the router's IP address into an internet browser. Then you will ask to enter your sign-in credentials. Now you have access to an update section. Click on it to go to the manufacturer's website, download the latest firmware, and upload it.
Move Your Router
Your broadband light blinking red because it is not at the correct position. By this, it can't maintain a stable and robust internet connection. Relocate the router to a different location and check for the problem.
Clear all Avoidance
The blinking red issue can occur when there are interfering objects block the signals. That makes the router create a strong connection. Move all the things or elements like cordless phones, microwaves, and others, away from the router.
Check for Overheating
Like other devices, the broadband routers are also overheated. To check for the overheating, simply touch it. If it is overheated or too hot, it results in the broadband light blinking red. Overheating the router will not function properly. Switch it off and wait until it cools down.
If you are still facing the same after performing the above steps, then perform the methods to fix the issue.
Steps to Fix Broadband Light Blinking Red
Measure 1: Restart Modem or Router
Restarting the router can fix your issue very quickly. Follow the given below steps:
- Firstly, unplug the router from the power outlet and wait at least 10-15 seconds. The router gets enough time to cool down in overheating cases.
- After that, plug the router back into the power outlet and check for the problem.
- This process can take up to 4-5 minutes.
Measure 2: Manually Factory Reset the Router
Generally, the above method works most of the time. If it doesn't work, then perform a factory reset manually. It will reset the router and fix your broadband light blinking red issue. Here's how:
- Firstly, find the Reset button. Generally, it is on the backside of the router.
- Then, pick a paper pin or SIM card pin.
- Now, using any pin, press and hold the Reser button for 8-10 seconds until the lights go off.
- When the router lights turn on, release the reset button.
- After the router turns on, check for the error.
If resetting the router to the factory settings doesn't help you, follow the following method.
Measure3: Update Your Router's Firmware
It seems that outdated firmware limits the gateway's ability to perform well. So you have to update your Router's firmware to fix the broadband light blinking red. Following are the steps:
- Firstly, you have to connect your gateway/router to a laptop or desktop using an Ethernet cable.
- Then, open any browser and type the router's IP address in the browser's address bar.
- Now, enter the sign-in credentials to log in to your admin configuration.
- Thereafter, from the left panel, pick Software UpdateCheck For Updates. Wait until the hardware finds any update if required.
- If any update is available, then click on the Software Update.
- In some time, your router will be updated to the latest release.
- After the update, check for the issue.
Measure 4: Replace the Connector
Sometimes, the main issue is with the connector. It is a plastic connector at the end of the broadband cable. This connector is responsible for connecting the broadband cable and router. Somehow, the connector doesn't function properly, so examine it properly. If you find any damage on it, then change it with the new one. After connecting, check your broadband light turns to normal.
Measure 5: Check for any Loose Connection
It is an unnoticeable situation when the user doesn't notice the loose cables, leading to the broadband light blinking red case. Sometimes, the users also plug the cables into the wrong ports by mistake. Plug the cables into the right ports and also tighten them. If there is any wear and tear cable, replace it with the new ones.
Read Also- ATT Router Login
Final Words
It is an annoying situation when you are not getting a proper internet connection, and your broadband indicates red light. So, to help you, we present you with this blog consisting of the best measures to get rid of the broadband light blinking red problem. We also mention the significant reasons responsible for the issue. The above-given measures are easy to use, and there is no need for technical knowledge to operate them. If you find any difficulty in the above-given guide, please do comment. We will answer you as soon as possible.
If you can't fix the issue after following the above guide and want an expert's help. Then dial +1 844-244-1311; our technical experts are available round the clock.
