The Voopoo Drag Nano 2 is a MTL 3 pre-set adjustable wattage pod firing up to a maximum of 20W and powered from its 800mAh internal re-chargeable battery. It’s constructed out of zinc alloy with a chrome outer frame with colored leather or PC inlay side panels.

Dimensions of the Drag Nano 2 are 71.5mm in height, which includes the attached pod, 44mm in width by 14.2mm thick and weighs in at 65 grams making this a very compact device.

Being draw activated only, the small control button just below the 3 LED’s doesn’t fire the pod but switches the Drag Nano 2 on/off and selects the 3 pre-set power levels. Sequential presses of the control button will select either Low, Medium or High wattage within the 8W-20W power level. The 3 different power levels are indicated by the color changing LED’s showing white, blue or red.

I couldn’t find the exact wattage of each power level within the 8W-20W specification but selecting each different power level did increase/decrease the vape intensity.

Airflow control is achieved by a single lever adjustable slider which adjusts from fully closed to an approximately 6mm rectangular slot when fully open CALIBURN GK2. The airflow lever protrudes from the Zinc Alloy frame by about 2mm so won’t break off if dropped. The resistance of the lever is tight so won’t move on its own.

Charging the internal battery is carried out via the Type-C USB charging port specified as 5V/1A. The 3 tiny LED’s gives a visual indication as to the charge status of the battery. Each LED represents 33% of charge and will cycle (slow flash) until it has reached that level. The next LED will cycle until all 3 LED’s remain static indicating that it’s fully charged.

There is NO firing button as the Drag Nano 2 is draw activated only and controlled by the GENE chip set, which also ensures the multitude of safety features are maintained, such as: