Working principle of grinding dust collector:

The smoke and dust enter the purifier through the exhaust port through the negative pressure generated by the fan, and the polluted air enters the guide channel. After the large particle dust collides with the guide plate, the large particle dust falls into the ash collecting drawer under the action of gravity, and the air containing fine particles Enter the filter chamber, pass through the filter element from the outer surface of the filter cartridge, and the dust is blocked by the filter element on its surface. The blocked dust is continuously deposited on the surface of the filter element. When it reaches a certain level, the filter element can be cleaned by a manual ash cleaner, or the filter cartridge can be cleaned by pulse jet, so that the dust particles deposited on the surface of the filter element are impacted by the compressed air. down, the surface of the filter element falls into the dust collection drawer, so that the entire surface of the filter element is cleaned, and the purified air is discharged through the fan.

grinding dust collector

The grinding dust collector has brought a huge change to the factory floor for the following reasons:

First, the grinding dust collector has a compact structure and a small footprint, saving workshop floor space;

Second, the grinding dust collector integrates the workbench and the dust collector, which can purify the grinding dust as quickly as possible while grinding the workpiece, effectively avoid the dispersion of smoke and dust in the workshop, and improve the workshop environment.

Third, the grinding and dust removal workshop is equipped with a drawer-type dust collector, and the collected dust directly falls into the welding dust funnel, which is convenient for daily maintenance.

The daily maintenance of grinding and dust removal work is divided into two parts. The first part is the maintenance of the cartridge filter. If the grinding dust collector is equipped with a pulse cleaning device, just press the button lightly, and the dust on the filter cartridge will be blown instantly. Put it into the dust collector at the bottom; if the equipment is not equipped with a welding fume purifier, just take out the filter cartridge of the grinding dust collector and blow it with compressed air.

Another part of the grinding dust collector that needs maintenance is the dust collection drawer. The volume of the dust collection drawer is about 0.3 m3 to 0.5 m3. The dust collection drawer needs to be cleaned regularly, preferably every 2 days.

grinding dust collector https://www.kaisenfilter.com/Grinding-Dust-Collector